
Gypsum Ceilings
Gypsum False Ceiling Installation
Living Room · Gypsum Board · Design & Build
From AED 70per sqm · entry specification
Service
Gypsum false ceilings that hide ducts and wiring, shape the light in the room and line up with the curtains, from AED 70 per square metre for a flat ceiling.
From AED 70 per sqm
flat ceiling, supply & install



Not sure which applies? Call or WhatsApp and we will point you the right way.


The simplest is a flat suspended ceiling, a level plane of board hung below the slab with the services hidden above it. A tray ceiling adds a lowered border around the room with a higher centre. Layered designs step down in two or more levels, and a shadow gap, a slim recessed line where ceiling meets wall, makes the whole ceiling look as if it floats.
Decorative borders, profiles and CNC-cut details suit a formal majlis or dining room, while bedrooms and apartments usually look best with clean edges and a single well-placed drop.
A false ceiling is the moment to decide how the room is lit, because the cut-outs and cable routes are fixed once the boards are closed. Cove troughs hold LED strips that wash light across the ceiling, recessed downlights light the floor below, and magnetic track lights let spots be moved along the track later.
Place furniture on the plan before the lights. A downlight should land over the dining table, the sofa or the reading chair, not wherever a neat grid happens to fall, and a pendant needs to know where the table will stand.
Linear slot diffusers sit flush in a gypsum ceiling and look far tidier than a surface grille. Their positions and the duct clearances are coordinated with whoever handles the AC, along with any access panels needed to reach equipment above the ceiling.
A concealed curtain pelmet is a recess built into the ceiling along the window, so tracks and motors disappear and the curtains fall straight from above. If motorised curtains are planned, say so at the start so the recess is built with the motor in mind.
Every drop takes height out of the room, so the ceiling is surveyed before any design is agreed. A tall villa living room or majlis can take several levels and a deep cove. A standard apartment room is usually better served by a slim border or a shadow gap that hides the services without making the room feel lower.
The board is Knauf or Mada, 12.5 mm or 15 mm thick, with a moisture-resistant type in wet rooms such as a bathroom or kitchen. It hangs from a heavy-gauge galvanised steel frame on rigid suspension, so the ceiling stays level.
Joints are taped with fibre mesh and skimmed in several coats until they disappear under the finish. That jointing is where a ceiling's quality shows, especially under the raking light of a cove.
The entry price covers the board, the framing and the fitting, so the ceiling is supplied and installed by us as one job. Labour-only work is priced separately, as set out under the price below.
Ceilings are made and fitted from our Sharjah base across the UAE. Each local page covers what differs in that city: gypsum ceilings in Sharjah and gypsum ceilings in Abu Dhabi.
For Dubai towers and villas, our Dubai page explains how ceilings are planned from a single measuring visit.
A flat ceiling with board, framing and fitting starts from AED 70 per square metre, and labour-only work from AED 35 per square metre. The area is the room's length multiplied by its width. To show the sum, a living room of 5 by 6 metres is 30 square metres: AED 2,100 at the full entry rate, or AED 1,050 labour-only. The two rates are alternatives, not added together.
Extra levels, CNC detailing, cove troughs, cut-outs for lights and high ceilings that need more access all add to the flat-ceiling rate. Those rates cover the entry scope only. Your quotation follows the site survey and the approved design. Light wiring by our own team is priced in it, while AC work and any specialised electrical work are left out unless they are listed.
The free site visit measures the room and its ceiling height and talks through the design and lighting you want. Once the drawing is approved, our own team wires the downlights and cove LEDs, and the AC work is coordinated with whoever handles it, so cables and ducts are in place before the ceiling closes over them.
The team then frames, boards, joints and skims the ceiling, and paints it too, so it is handed over finished. A typical room takes about two days from framing to paint.
Dust settles in the open top of a cove trough, so wipe it out now and then with a dry cloth on a pole. Heavy light fittings or ceiling fans must be fixed to the framing or a support above it, never hung from the board alone.
A fine crack along a joint can appear if the building moves or a leak reaches the ceiling from above. Our 24-month workmanship warranty covers defects in our work, while damage caused by the building settling or by water coming through later is assessed according to its cause.
Gypsum & False Ceilings
Knauf and Mada moisture- and fire-resistant boards (12.5 mm and 15 mm)
Heavy-gauge galvanised steel framing and rigid suspension
Seamless joint taping, fibre mesh and multi-coat skimming
Magnetic track lighting, downlight cut-outs and shadow-gap profiles
Linear slot AC diffusers and concealed curtain pelmets
Suits
24-month written workmanship warranty; supplied products follow their applicable written terms.
Gypsum & False Ceilings
Starting from
AED 70
per sqm · flat ceiling, supply & install
Priced per square metre of ceiling. Levels, cove troughs, lighting cut-outs and CNC detailing set the final figure. Labour-only from AED 35 per sqm. Pricing guide

Gypsum & False Ceilings, at the published starting rate.
Your home
About 30 sqms of gypsum & false ceilings from
AED 2,100
A rough starting budget at the entry specification. Your quote follows measurement.
Starting prices reflect entry specifications and standard materials. Final quotation is provided after on-site laser measurement, fabric/wood selection and design confirmation. Excludes complex structural alterations or specialised electrical MEP unless itemised. Pricing guide

One team, start to finish.
01
The room and its ceiling height are measured, and the levels and lighting are talked through.
On site
02
You approve the ceiling drawing and an itemised quotation before the work is booked.
Before work starts
03
Our team wires the lights, and the AC ducts are agreed with your AC installer, before the boards go up.
On site
04
We build the steel frame, fix and skim the boards and paint the ceiling; a typical room takes about two days.
On site
4 jobs

Gypsum Ceilings
Living Room · Gypsum Board · Design & Build
From AED 70per sqm · entry specification

Gypsum Ceilings
Majlis · Gypsum Board · Design & Build
From AED 70per sqm · entry specification

Gypsum Ceilings
Living Room · Gypsum Board · Design & Build
From AED 70per sqm · entry specification

Gypsum Ceilings
Office & Study · Gypsum Board · Design & Build
From AED 70per sqm · entry specification
Everything is made to measure. Send a photo and rough sizes for a starting price.
Type a word and the answers narrow as you go.
9 of 9 answers
From AED 70 per square metre for a flat ceiling with materials and fitting, or AED 35 per square metre labour-only. Levels, lighting and detailing add to it, and your own figure comes after the site survey.
Yes. Warm or neutral LED cove troughs with dimmers can be built into the design, along with downlights and magnetic track lighting.
Yes. Where the diffusers sit, how much room the ducts need and where access panels go are agreed with whoever handles the AC, before the ceiling closes.
Yes. A concealed pelmet built into the ceiling hides the track and any curtain motor, so the curtains fall straight from above.
For most rooms it is. Gypsum board makes a smooth, seamless false ceiling that can take cove troughs, downlights, shadow gaps and AC slots, with a moisture-resistant board used in bathrooms and kitchens.
About two days for a typical room, from framing to the last coat of paint. Larger rooms, extra levels and many light cut-outs add time.
Yes. Our own team paints the ceiling once the gypsum work is done, and wires the downlights and cove lighting too.
That depends on the design and on what has to fit above it, such as ducts and light fittings. The ceiling height is surveyed before a design is agreed. For rooms with less height, see how much height a false ceiling takes in a low-ceiling room.
Properly framed and jointed ceilings are built to stay smooth. A fine crack can still appear if the building moves or water leaks in from above. A defect in our own framing or jointing is ours to put right within the 24-month workmanship period.
Free on-site visit
Choose fabric and finishes in your own light, next to your own walls, then we laser-measure and send a drawing and an itemised quote.