Skip to main content
Floor-level seating with deep seat cushions under a button-tufted backrest set with crystal-style buttons, maroon bolsters along the front.

1 / 2

Floor-level seating with deep seat cushions under a button-tufted backrest set with crystal-style buttons, maroon bolsters along the front.

Sofa Upholstery & Repair

Sofa Foam & Cushion Replacement

Majlis · Foam & Frame · Repair & Restore

Priced

Free inspection

Quoted after we see the piece

Quoted after site visit

The free inspection comes first; a typical job is collected, restored and returned in about 8 days from order confirmation.

About sofa foam & cushion replacement

Foam replacement is for seating that still looks good but has lost its comfort: cushions that stay flat when you stand up, edges that roll forward, a favourite seat that has sunk lower than the rest. The cover stays; the tired foam inside is taken out, and new foam, cut to the cushion's exact size in the grade you choose, goes in its place.

It works for the loose cushions of a sofa and for the thick seat slabs of a floor majlis like the one pictured, where the foam is the whole of the comfort. Cushions are re-foamed together, across a sofa or a set, so every seat feels the same afterwards. Before anything is ordered, the inspection checks that the problem really is the foam and not the springs or webbing beneath it, because new foam on a failed base sinks just as quickly as the old.

See all upholstery

Settle these first

Worth thinking about before we meet.

  1. Foam or base

    Press the seat with its cushion lifted off: if the base itself gives way, the support needs repair before new foam is worth fitting.

  2. Firmness by feel

    Choose firmness by sitting on samples, since a denser grade is not automatically a harder one.

  3. Seats and backs

    Seat cushions carry the weight and usually take a denser foam than back cushions, which mainly need to keep their shape.

  4. All at once

    Re-foam every seat in a sofa or set together, so no cushion ends up higher or firmer than the one beside it.

Why foam goes flat

Foam is made of countless tiny cells that spring back after you stand up. Years of daily sitting break those cells down, and a cushion slowly loses height and bounce, starting where people sit most. Heat speeds the process along, and so does always sitting in the same spot.

By the time a cushion stays dented after you get up, or you can feel the frame through the seat, the foam has done its work. Replacing it brings the seat back to its full height.

D35, D40 and D45

The grades we fit are D35, D40 and D45. The number is the foam's density: the higher it is, the more material is packed into each cushion and the longer it resists flattening. D45 suits seats in daily use and majlis floor cushions that carry a person's whole weight; D35 can be enough for back cushions or a sofa that is only used now and then.

Density and firmness are separate things. A high-density foam can feel soft or firm depending on how it is made, so the grade is picked for how long the seat should last and the firmness for how it feels when you sit. Both are named in the quotation, and the new foam is guaranteed against sagging for about five years.

Floor majlis cushions

On a floor majlis the seat cushion is the seat. There is no frame or spring underneath, only the floor or a low platform, which asks more of the foam than any sofa cushion does. Floor seating therefore usually takes the densest grade, and enough depth that guests do not sink towards the floor during a long evening.

Majlis seat slabs are long and heavy, and each one is cut to its own length so the run stays level along the wall. Back cushions and bolsters can be refilled at the same time, so the whole set feels new rather than just the seats.

Sofa seat and back cushions

Loose seat cushions are the simplest to re-foam: each cover is opened, the old foam comes out, and new foam cut to the same size goes in. Fixed seats, where the foam is upholstered into the frame, need the cover opened along a seam, which takes longer but follows the same idea.

Back cushions are often softer, and sometimes filled differently from the seats. They are checked with the seats and refilled where they have slumped, so the sofa does not end up with firm seats against tired backs.

When new foam is not the answer

If a seat dips even with its cushion lifted off, or you can feel bars or springs beneath, the support has failed rather than the foam. New cushions on a broken base soon sink again, so the inspection checks the springs and webbing first and adds that repair to the quotation if it is needed.

Likewise, if the cover is worn through, re-foaming alone leaves comfortable seats in shabby fabric. Then a new cover, or full reupholstery, may be the better spend, and the inspection sets out both options.

Re-foaming a whole set

Foam is replaced across a whole sofa or set at the same time. Swapping one cushion leaves it higher and firmer than its neighbours, and the difference shows every time someone sits down. For the same reason, one cushion by itself is not accepted as a job.

Doing every seat together also means one inspection, one collection and one return.

Collection, timing and guarantee

After the free inspection, the cushions, or the whole sofa if its seats are fixed, are collected, re-foamed at the Sharjah workshop and returned. Transport both ways is charged, and the amount is on the quote. Most foam jobs take around eight days from approval.

The work itself has our 24-month written workmanship warranty on top of the foam's own sagging guarantee.

Choosing firmness at the inspection

Samples of the foam grades come to the inspection. Sit on each one for a minute rather than pressing it with a hand: a hand test makes most foam feel firmer than it does under your full weight, and the difference between grades only shows when you settle into them.

Expect the re-foamed seats to sit a little higher at first. The old foam had sunk, and you may have grown used to sitting lower; within a few days the new height usually feels right.

Your covers while the cushions are open

Re-foaming reuses the existing covers, so look at them closely at the same time. A split seam can be noted at the inspection, and if the covers have faded or worn unevenly, this is the moment to decide whether new ones should go on too, because the cushions are already open.

What the foam quotation shows

The quotation lists every cushion and slab by its size, with the grade chosen for each, which makes it plain where the denser foam is going and what each part of the set costs to refill. On a majlis, bolsters and scatter cushions appear as lines of their own, which makes it simple to decide whether they are refilled now or left for another time.

One firmness for the whole sofa

Households often disagree about how firm a seat should be. A firmer seat is easier for older family members to rise from; a softer one suits lounging in front of the television. Settle on one firmness for the whole sofa rather than mixing grades seat by seat, because cushions of different firmness wear at different rates and the sofa soon looks uneven.

The specification

Sofa Upholstery & Repair

  • 2,000+ stain-resistant, water-repellent and pet-friendly fabrics

  • High-density foam (D35, D40, D45) with an anti-sagging guarantee of about 5 years

  • Hardwood frame reinforcement, re-jointing, webbing and spring replacement

  • Genuine Italian leather, faux leather and luxury velvet

  • Door-to-door pickup, workshop restoration and delivery

Suits

  • Living room sofas
  • Arabic majlis seating
  • Dining chairs
  • Bed headboards
  • Hotel & office lounges

24-month written workmanship warranty; supplied products follow their applicable written terms.

At a glance

Room
Majlis
Material
Foam & Frame
Type of work
Repair & Restore
Property type
Villa
Availability
Quoted after site visit
The free inspection comes first; a typical job is collected, restored and returned in about 8 days from order confirmation.

How it is made and installed

We inspect the piece at your home for free, agree fabric and foam with you from physical samples, collect it, rebuild it in the workshop and deliver it back. Quoted after a free inspection. Frame condition, springs, foam volume and metres of fabric differ on every piece, so an honest price needs someone to look at it.

The free inspection comes first; a typical job is collected, restored and returned in about 8 days from order confirmation.

How the free visit works

Common questions

Type a word and the answers narrow as you go.

8 of 8 answers

  • How do I know if my sofa needs new foam?

    Lift a seat cushion off and press the base. If the base is firm but the cushion stays dented after you stand, or has lost noticeable height, the foam is the problem.

  • Which foam grade should I choose?

    D45 for seats used every day and for majlis floor cushions, D40 as a middle ground, and D35 often for back cushions. Firmness is then chosen by feel, sitting on samples.

  • Can the seat be firmer or softer than before?

    Yes. The new foam does not have to match the old, so a seat that always felt too soft or too hard can be changed when it is re-foamed.

  • Do you replace a single cushion?

    No. Cushions are re-foamed for a whole sofa or set together, so every seat matches in height and feel.

  • Will my old covers still fit?

    Yes. The new foam is cut to each cushion's original size, so the cover fits as it did, and it often looks fuller again because the old foam had shrunk inside it.

  • How long are the cushions away?

    Typically around eight days after you approve the work.

  • Does new foam smell?

    It can have a faint smell for the first few days, which fades as the cushions air in the room.

  • Can older family members still get up easily from floor seating?

    That depends a lot on how deep and firm the seat is. If rising from the floor majlis is hard for someone at home, mention it at the inspection, so the grade and the cushion are chosen with them in mind.

Free on-site visit

We bring the samples

Choose fabric and finishes in your own light, next to your own walls, then we laser-measure and send a drawing and an itemised quote.

Linen
Sheer voile
Velvet
Bouclé
Oak
Walnut
Marble
Tinted glass
Get a Free Quote on WhatsApp