Skip to main content

Media Walls · 20 min read · 26 September 2026

Removable media walls for tenants in the UAE: pieces that travel

How a media wall is made to come apart and travel: what removable really means, how a wall is split into pieces, what moves and what stays, keeping a tall unit stable, and the seven-step take-down.

By Ali Haider Basra, Founder, Al Tareeq Decor · Contact our workshop

Marble-effect panel TV wall with a gold inlay, grey slatted sides and a chandelier in a living room

Key takeaways

  • A removable wall is planned to come apart: separate pieces, few fixings, and a drawing that shows the break lines.
  • Not every fitted wall is removable; ask which pieces travel, in what condition, and what the wall looks like afterwards.
  • The TV, its bracket and a floating console usually travel; wiring inside the wall and the sockets stay with the building.
  • A tall free-standing unit can tip if it is top-heavy: ask your landlord about one small fixing at the top.
  • Take the wall down last in, first out, plan it with the maker, and photograph the wall from the same spots as the move-in photos.
On this page

The short answer: a removable wall is a wall designed to come apart

A removable media wall is one planned from the start to leave with you: separate pieces rather than one built-in mass, as few fixings in the building as the design allows, and a drawing that says which parts are fixed, which are free-standing and where the pieces separate. It is not a different style, it is a different way of building. A modular wall can look much like a fixed one; what differs is what happens on the day you move.

We can make removable or relocatable designs, as freestanding or modular arrangements, and we say plainly that not every fitted build can be removed; it depends on how the wall is built. This guide explains what to ask for, how a wall is split into pieces, which parts almost always travel and which stay, how to keep a tall unit stable, and the order in which a wall comes down. It does not describe the workshop's construction details because we ask you to see them on your drawing rather than take our word for them, and it gives no legal advice: your tenancy contract and your landlord decide what is allowed.

What "removable" does and does not mean

People use the word loosely, so it is worth pinning down. A freestanding wall is removable in the simplest way: nothing is fixed to the building, and it moves like furniture. A modular wall is removable in a practical way: it has a few small fixings, which are undone, and then the pieces separate. A fixed wall may be removable in principle, but only by cutting it apart, and what you get at the end may not be reusable. The honest test is a single question to the maker: "If I move in two years, which pieces come with me, in what condition, and what does the wall look like afterwards?"

Some things are never removable in the sense of travelling. Anything built into the building, such as wiring inside the wall and the socket outlets, stays with the building. Paint and filler used to repair fixing holes stay. Tenancy Services New Zealand puts the principle plainly: a minor change is one that can be easily reversed, so that the property can be returned to substantially the same condition. That is a New Zealand rule, not a UAE one, but it describes the target for a tenant's design: reversible, with the wall returnable to the state it was in.

If you have not yet decided between the three kinds of build, media wall in a rented flat compares freestanding, modular and fixed by stay length and by what your landlord allows. This guide assumes you have chosen a build that comes apart, and goes into how.

Splitting one wall into pieces

A wall is made removable by deciding, on the drawing, where it breaks. The diagram below shows the idea on a generic wall: a left and right shelf tower, a TV panel and a floating console. The dashed outline is the wall as built; the solid pieces are how it comes apart. Each piece is a complete unit with its own finish and, where planned, its own lighting, so it can be lifted out, carried and reinstalled without being rebuilt.

There are good reasons to split a wall beyond moving. Smaller pieces fit lifts, corridors and doors more easily, which is also why modular walls are friendlier to apartments with tight access; our apartment delivery guide covers that side. A single damaged piece can be repaired or replaced without disturbing the rest. And a piece can be reused in a different arrangement in the next home. The trade-off is that every break line is a joint, and joints are visible. A good drawing hides them in places where the eye expects an edge, such as beside a shelf tower or under a console, and a good maker shows you where they fall before you approve.

So the question to ask is not whether a wall can be split, but where. Ask the maker to mark the break lines on the drawing, to say which pieces are fixed to the wall and which stand free, and to list the fixings. Ask how the joins look at normal viewing distance. We make our walls in the Sharjah workshop and our own team fits them, so you can ask for these marks in the drawing you approve.

An exploded elevation of a media wall split into four pieces: two shelf towers, a TV panel and a floating console, with the assembled outline dashedAn exploded front view of a media wall as four separate pieces: a left shelf tower, a TV panel, a right shelf tower and a floating console, with the assembled wall shown as a dashed outlineOne wall, four piecesDashed: the wall as built. Solid: how it comes apartTV1Left tower: shelves and its light2TV panel: the feature surface3Right tower: shelves and its light4Floating console: the drawer unit1234Ask on the drawing: where are the break lines between pieces?Pieces that separate are pieces you can take to the next homeAl Tareeq Decor · altareeqdecor.ae
  1. 1. Left tower: shelves and its light
  2. 2. TV panel: the feature surface
  3. 3. Right tower: shelves and its light
  4. 4. Floating console: the drawer unit
  5. 5. Ask on the drawing where the break lines between pieces are
One wall, four pieces. Dashed: the wall as built. Solid: how it comes apart. Pieces that separate are pieces you can take to the next home.

What to ask on the drawing

A removable wall is only as removable as its drawing says it is, so ask for the answers in writing. Which pieces are fixed to the wall, and with how many fixings? Which stand free? Where are the break lines, and what do the joints look like? Where does the lighting driver sit, and does it travel with a piece or stay on the wall? Which part of the cable route is inside the wall? How is the TV held, and what do the bracket holes leave? If any answer is "it depends", ask what it depends on.

Then ask what the quotation says about the move-out. Is the take-down part of the job, or a separate visit? Who does it? What does it cost, if it costs anything? We do not publish a price for take-down, so ask for it in the quotation if you want it. Our questions to ask before you order puts these in the wider list, and asking your landlord in writing shows how to pass the drawing's fixing points on to the person who has to agree.

Keeping a tall unit stable

Free-standing is not the same as safe. A tall unit that stands on the floor can tip if it is top-heavy or if a drawer or door is pulled. The US Consumer Product Safety Commission warns, in a notice about IKEA chests and dressers, that chests and dressers can tip over if they are not attached to the wall, which is an entrapment hazard. That notice concerns those products and is not a rule for every unit, but the mechanism is the same for any tall, narrow piece of furniture, and it matters most where there are children.

The drawing shows the idea: a unit loaded high with nothing holding it can lean forward when pulled, and a small fixing at the top holds it upright. In a rented home that fixing is a question for your landlord, because it is a hole in the wall, even if a small one. Consumer Affairs Victoria, in Australia, lists wall anchors to secure items of furniture among the items a renter may install without permission on most surfaces, with exceptions for exposed brick and concrete walls. That is a Victorian rule and not a UAE one, but it shows how seriously securing furniture is treated, and why it is worth asking.

In practice you have three options for a tall unit in a rental. Choose lower units and tall ones only where the design allows. Keep the heaviest items low in the unit. Or ask your landlord for one small fixing at the top, with the drawing showing where it goes. Ask your maker which pieces in your design are tall enough for the question to arise. A tall tower beside the TV may be the only one.

Two side views of a tall freestanding unit: left it tips forward when pulled; right a strap to the wall at the top holds it uprightTwo side views of a tall freestanding unit next to a wall: on the left the unit tips forward when pulled, on the right a strap from the top of the unit to the wall holds it upright, with a note about a US safety agency's tip-over warningA tall unit and the pull on itSide views: the wall is the hatched bar on the left of eachPullNot anchoredAnchored at the topLoaded high, it can leanwhen a drawer or door is pulledOne small fixing at the top(a landlord's yes, in writing)A US safety agency (CPSC) warns that chests and dresserscan tip over if they are not attached to the wall.Freestanding is not the same as unfixed-and-safe: ask about the one small fixingAl Tareeq Decor · altareeqdecor.ae
  1. 1. Not anchored: loaded high, it can lean when a drawer or door is pulled
  2. 2. Anchored at the top: one small fixing, with the landlord's yes in writing
  3. 3. A US safety agency warns that chests and dressers can tip over if not attached to the wall
A tall unit and the pull on it. A small fixing at the top may be the safe answer, and it is the landlord's decision.

The TV, the bracket and the cables

The TV is the heaviest single item, so it deserves its own plan. A wall-mounted TV needs a bracket, and a bracket needs fixings into something that can carry the load. Mantel Mount, a TV-mount maker, advises people to understand what their home is built from before doing anything, because it decides the right type of anchor. In a rented flat that means the maker should check the wall first, and the landlord should be told what will go into it. If fixings are not allowed, use a stand or a console, as the TV needs nothing from the wall that way.

Cables are easier in a removable design if they run along or through the pieces rather than inside the wall. Plug-in lighting powered from an existing socket moves with the unit, while wiring in the wall belongs to the building. Our own team installs the internal LED lighting in our units, and the useful question is where the driver sits and whether it can be unplugged and carried. Our guides on sockets and power, cable routes you can still service and media wall lighting explain the choices, and the electric fireplace guide explains why a fireplace needs its own power and clearance, which is worth knowing before you plan to take it with you.

What moves, what depends, what stays

At move-out the parts of a media wall fall into three groups. The TV and its bracket, and a floating console that is planned to lift off, usually travel. Shelf towers, feature panels and the LED channels with their driver depend on how they were built and fixed. Wiring in the wall and the sockets stay with the building. The matrix shows that typical pattern, and the table beneath it turns each row into a question for the maker. A quotation should state the real answer for your wall.

It helps to decide in advance which parts you most want to keep. If the console and one tower matter most, ask for them to be designed as the pieces that travel, and let the rest be the part that stays, if your landlord agrees. If you want everything, say so, and expect the design to carry more joints. That is a sensible trade, and it is better made on paper before production than on the day.

Each part, the question to ask and the answer to look for

  • TV and bracket

    Ask the maker
    What do the bracket holes leave, and who fills them?
    A good answer
    The number of holes is on the drawing; filling is agreed
  • Floating console

    Ask the maker
    Can it be lifted off, and by how many people?
    A good answer
    Yes or no, stated on the drawing
  • Shelf towers

    Ask the maker
    Do they stand free, or are they fixed to the wall?
    A good answer
    Stated for each tower
  • Feature panels

    Ask the maker
    How are they held, and do they come away in pieces?
    A good answer
    The pieces and joints are shown
  • LED channels and driver

    Ask the maker
    Does the lighting travel, and where is the driver?
    A good answer
    The driver's position is on the drawing
  • Wiring and sockets

    Ask the maker
    Does any wiring change?
    A good answer
    No change, or the change is agreed with the landlord

Questions to put on the drawing, not a statement of how any particular wall is built. Ask for the answers in the quotation.

A matrix of six media wall parts against three outcomes at move-out: usually travels, depends on the build, usually staysA matrix of six media wall parts against three outcomes at move-out: the TV with its bracket and the floating console usually travel, shelf towers, feature panels and LED channels depend on the build, and wiring in the wall with the sockets usually staysWhat leaves with youA typical pattern; the quotation states the real answer for your wallTravelsDependsStaysTV and its bracketFloating consoleShelf towers?Feature panels?LED channels and driver?Wiring in the wall, socketsAsk: which of these can come apart without damage, and which cannot?Al Tareeq Decor · altareeqdecor.ae
  1. 1. TV and its bracket usually travel
  2. 2. Floating console usually travels
  3. 3. Shelf towers depend on the build
  4. 4. Feature panels depend on the build
  5. 5. LED channels and driver depend on the build
  6. 6. Wiring in the wall and the sockets usually stay
A typical pattern, not a promise: the quotation states what leaves with you for your wall.

Taking it down: seven steps, last in first out

A wall should come down in the reverse order of its fitting, and the order protects both the wall and the pieces. First the screen and soundbar come off the bracket and go into their boxes, with the bracket screws in a labelled bag. Second the cables come out, each labelled; if it is safe, photograph the connections first. Third the lighting is dealt with: switch it off and leave electrical disconnection to a qualified person. Fourth the console and shelf units are emptied and lifted out as pieces. Fifth the feature panels are numbered on the back and taken off. Sixth the wall is repaired, filling the fixing points and touching up as agreed in writing. Seventh the wall is photographed again from the same spots as the move-in photos.

Plan this with the maker, not with a friend and a screwdriver, and book it for a day before your handover, not the same morning. A take-down done in a hurry on the last day risks a damaged piece and a damaged wall. If you are moving to a new home, plan the next wall before you take the first one down: measure the new wall, check that the pieces suit it, and ask the maker whether a re-fit visit can be arranged. Pieces that fit one wall will not always fit another, and it is better to know before you pack.

A seven-step staircase for taking a media wall down, last in first out, each step lower and shorter than the one aboveA staircase of seven steps, each shorter and lower than the one above, for taking a media wall down: screen and soundbar, cables, lighting, console and shelf units, feature panels, wall repair, and photographing the wall againTaking it down: seven stepsLast in, first out: the reverse of the fitting1Screen and soundbar off the bracketBox them; keep the bracket screws in a labelled bag2Cables out, each one labelledPhotograph the connections first, if it is safe to do so3Lighting: driver and channelsLeave electrical disconnection to a qualified person4Console and shelf unitsEmpty them first; lift out as pieces, not as a heap5Feature panelsNumber the back of each panel before it comes off6Wall repairFill the fixing points; touch up as agreed in writing7Photograph the wall againSame spots as your move-in photosBook the take-down with the maker; it is a planned job, not a weekend rushAl Tareeq Decor · altareeqdecor.ae
  1. 1. Screen and soundbar off the bracket, boxed, with the screws in a labelled bag
  2. 2. Cables out, each labelled, connections photographed first if safe
  3. 3. Lighting: driver and channels, electrical disconnection left to a qualified person
  4. 4. Console and shelf units emptied and lifted out as pieces
  5. 5. Feature panels numbered on the back before they come off
  6. 6. Wall repair: fixing points filled and touched up as agreed in writing
  7. 7. Photograph the wall again from the same spots as the move-in photos
Taking it down in seven steps, last in first out. Book it with the maker; it is a planned job, not a weekend rush.

Repairing the wall and the landlord conversation

Taking a wall down leaves marks, and the question is who deals with them and how. Consumer Affairs Victoria says a rental provider may require a renter to restore the property to the condition it was in immediately before the change, or pay the cost of doing so, where changes were made without agreement. Tenancy Services New Zealand says that if you cause damage when removing fixtures, you should tell the landlord, who can then say whether they want you to fix it or compensate them. Both are other jurisdictions, but the common sense is the same: tell the landlord what you found and agree what repair means.

The best time to agree it is before you start, in the same written thread as the original request. If the landlord agrees to a few small fixings and you say you will fill and touch them up, the move-out is a matter of doing what you said. If your landlord prefers to keep the wall, the thread should say so, and Tenancy Services New Zealand notes that a fixture a tenant leaves behind becomes the landlord's property unless they agree otherwise. Whatever the case, finish with photographs, which are the quietest way to settle any later question. Our guide to asking your landlord in writing shows the photo routine on a room plan.

Does a removable wall cost more or last less?

A removable build is a different construction, so it is fair to ask whether it costs more or lasts less. We do not publish a separate price for removable designs, and we will not guess at one: the quotation gives the figure for your wall, and our published starting point is from AED 3,500 per project for a compact panel and floating console in standard laminate. What drives the figure is wall size, finish, marble-effect panels, lighting and any electric fireplace, whether or not the design comes apart. What a media wall costs breaks it down, and media wall materials and costs names the parts.

On how long it lasts, the useful question is not whether a removable wall is weaker, but how well it will be handled. Pieces moved carefully and refitted properly can serve in more than one home, which changes the cost per year of use. Pieces moved carelessly can lose a corner. The board that sits behind the finish matters either way, and media wall panels compared explains the types. Our warranty is a 5-year limited warranty on the wood-based boards only, with hinges, runners, labour and misuse excluded, so ask what take-down and refitting do to that warranty and get the answer in writing.

A worked example: a family moves after two years

Take a family in a rented flat who built a modular wall two years ago: a left and right shelf tower, a feature panel, a floating console and a TV on a bracket, held to the wall by a handful of small fixings their landlord agreed to in writing. They are moving to a larger rental. Everything here is an invented scenario to show how the pieces come apart; it describes no real customer.

A month before the move they measure the new living-room wall and send the drawing and photos to the maker, who tells them the console and one tower will suit it, while the other tower and the panel are better left, with the landlord's agreement, or reconfigured. They agree a take-down day, two days before the handover. On the day the screen and soundbar are boxed, the cables labelled and unplugged, the console and towers lifted out and the panel numbered and removed. The fixing points are filled and touched up as agreed, and the family photographs the wall from the same spots as when they moved in. The landlord receives the photos with a thank-you, and the thread shows the original agreement. The pieces go into the new flat, and a few more are made to complete the wall there.

What made that smooth was not luck. It was the drawing that showed which pieces travel, the written agreement about repair, the photos at both ends and the planning of the take-down date. Every part of it can be arranged before the first panel is cut.

Marble-effect panel TV wall with walnut slats and lit niches on both sides in a living room
From our project library: a marble-effect panel with walnut slats and lit niches. A wall like this can be planned as a central panel and side units, with the break lines on the drawing.

Mistakes people make with a removable wall

The commonest mistake is to assume that a wall which looks modular is removable. Ask. The second is to leave the take-down to the last day. The third is to forget that wiring and sockets belong to the building, so a lighting plan that depends on wiring in the wall does not travel. The fourth is to leave the tall unit unsecured. The fifth is to approve a drawing that does not show the break lines, because the joints will then be a surprise. The sixth is to skip the photographs. The seventh is to assume the pieces will fit the next home; measure the new wall first.

None of these needs expertise to avoid. They are avoided by asking for the answers on the drawing and in writing before you approve it. If you want a broader plan for the whole project, planning a media wall lists the decisions to settle first, and media wall red flags lists the signs to watch for in how a maker answers.

Finish and panel choices for a wall that will be moved

A wall that will be handled twice, once out and once in, should have a finish that forgives handling. Hard-wearing laminate marks less than a delicate surface, and edges are the weak point on any piece that is lifted, so ask which edges are exposed and how they are protected. Our guides to finish samples and approval and colour and finish explain how to judge a sample, and a darker or textured finish tends to hide small marks better than a pale gloss.

Feature panels deserve a second thought. Acoustic fluted slats and marble-effect panels look striking, but each adds joints and edges, so read fluted and slatted TV walls and marble-effect TV wall options with the move in mind, and ask where the joins fall on the drawing. If the wall sits against an outside wall or a damp area, the guide to humidity and MDF is worth reading before you choose, and if you are not sure what a media wall is made of, what is a media wall sets out the parts. Whatever you pick, a sample seen in the room is better than a photograph, and we bring samples to the visit.

When a removable wall is the wrong choice

A removable build is not always the best answer. If you own the home, or have a long lease and a landlord who is happy for a full build to stay, a fixed wall gives the cleanest result, with the fewest joints and the most freedom in the design. If you want a feature wall in a particular position that depends on being fixed, such as a full-height panel with concealed wiring, it may not be possible to make it removable. And if you will move within a few months, a freestanding console and TV stand may serve you better than any custom build, as the cost per year of the comparison chart in media wall in a rented flat suggests.

For smaller needs, media wall versus a TV unit sets out the differences, and small living room media walls shows compact layouts. Our job is to tell you which build suits your situation, not to sell the most elaborate one.

What we do

We make custom media walls in our Sharjah workshop and install them across the UAE, and we make removable or relocatable designs, as freestanding or modular arrangements, for rented homes. Not every fitted build is removable; it depends on how it is built, and your drawing will say which parts are fixed and which are free. Our measuring visit is free and includes samples and a laser measure, and a drawing and an itemised price are agreed with you before anything is made. Once measurements and details are agreed, a 60% advance is paid and production starts when it is received; the remaining stage is agreed with you.

Walls start from AED 3,500 per project for a compact panel and floating console in standard laminate, and the final figure comes from the quotation. A typical wall is finished in up to about 10 days, depending on its size and design. The warranty is a 5-year limited warranty on the wood-based boards only. Our founder, Ali Haider Basra, has 10 years in the trade. See our media walls page, custom media walls, TV wall units and floating consoles and media walls in Sharjah. For the visit, what happens at a measuring visit lists what we record, and for finishing touches the handover checklist tells you what to inspect.

Floating TV unit with oak slats and an LED backlit panel behind the TV in a living room
From our project library: a floating unit with oak slats and a backlit panel. A floating console is one of the pieces most often planned to lift off and travel.

Send us the wall on WhatsApp

Tell us you rent and that you want a wall that can come apart. Send a photo of the wall taken straight on from the middle of the room, the TV size, a photo of the room, how long you expect to stay and what your landlord has said. We will tell you which pieces would travel and what a visit would look at. Orders are confirmed on WhatsApp, so the drawing with its break lines stays in the same thread. A list of what to include is in what to send before a consultation.

Common questions

  • Can a media wall be removed and taken to a new home?

    Modular and freestanding designs can, because they are planned as separate pieces with few fixings; a fixed build depends on how it was made, and not every fitted wall is removable. Ask the maker which pieces travel before you order. Media wall in a rented flat helps you choose the build.

  • What is a modular media wall?

    A wall made of separate pieces, such as shelf towers, a TV panel and a floating console, each able to be lifted out, with a few small fixings in the building. The drawing should mark the break lines. Our questions to ask before you order lists what to confirm.

  • What stays behind when I remove a media wall?

    Wiring inside the wall and the sockets belong to the building and stay, as do filler and paint used to repair fixing holes. Shelf towers, panels and lighting depend on how they were built. Asking your landlord in writing shows how to agree repairs in advance.

  • How do I take a media wall down without damaging the wall?

    Work last in, first out: screen and soundbar, cables, lighting, console and shelf units, panels, then repair the wall and photograph it. Plan it with the maker rather than doing it in a rush. Our installation day checklist shows the fitting side of the same job.

  • Do tall free-standing units need fixing to the wall?

    A US safety agency warns that chests and dressers can tip over if not attached to the wall, so a tall unit is worth raising with your landlord; one small fixing at the top may be the safe answer. TV height on a media wall shows how tall a design really is.

  • Does a removable media wall cost more?

    We do not publish a separate price for it; the quotation gives the figure for your wall, and our walls start from AED 3,500 per project for a compact panel and floating console in standard laminate. What a media wall costs explains what drives the figure.

  • Is the 5-year warranty valid if I move the wall?

    Our 5-year limited warranty covers the wood-based boards only and excludes hinges, runners, labour and misuse; ask in writing how take-down and refitting affect it. Our red flags guide explains why to get warranty terms on paper.

Sources & specifications

Manufacturer information applies to the named products and systems. Sources reviewed on 10 November 2026.

  1. US Consumer Product Safety Commission: IKEA offers free wall anchoring repair kit for chests and dressers (tip-over risk when not attached to the wall)cpsc.gov(opens in a new tab)
  2. Tenancy Services New Zealand: Tenants making changes to the property (easily reversed changes; tell the landlord about damage; fixtures left behind; example from another country)tenancy.govt.nz(opens in a new tab)
  3. Consumer Affairs Victoria (Australia): Tenants installing fixtures and altering the rental property (wall anchors for furniture; restore or pay; example from another country)consumer.vic.gov.au(opens in a new tab)
  4. Mantel Mount: Mounting a TV on drywall, stucco and plaster (know what the wall is made of)mantelmount.com(opens in a new tab)

Want this planned for your home?

Consultation and measurement are free. Tell us the rooms, location and what you need; we arrange a sample visit and define the measured quotation.

Services this article applies to

Media Walls & TV Units made by Al Tareeq Decor

Media Walls & TV Units

From AED 3,500 per project

The service behind this guide

Media Walls & TV Units

Slatted acoustic wood, marble-effect panels and integrated LED lighting.

From AED 3,500 per projectFabricated in our Sharjah workshop after you approve the drawing; a typical media wall is finished in about 10 days from order confirmation, depending on its size.
  • High-density acoustic fluted wood slat panelling in oak, walnut and charcoal
  • High-gloss and matte porcelain or Calacatta marble-effect panels
  • Floating storage consoles with soft-close hinges and push-to-open drawers
  • Integrated 3000K warm or 4000K neutral LED channels with dimmers
Get a Free Quote on WhatsApp